View the manual for the MSI 990FXA-GD65 here, for free. This manual comes under the category Motherboards and has been rated by 1 people with an average of a 6.7. This manual is available in the following languages: English, Chinese. Do you have a question about the MSI 990FXA-GD65 or do you need help? Ask your question here.
Optix Series
LCD Monitor
Optix MAG272C (3CA5) | Optix MAG272 (3CA7) |
Optix MAG272CR (3CA5) | Optix MAG272R (3CA7) |
Optix MAG272CQR (3CA6) | Optix MAG272QP (3CA8) |
Optix MAG272CRX (3CA0) | Optix MAG272QR (3CA8) |
Contents
Copyright and Trademarks Notice iii Revision iii Technical Support iii Safety Instructions iv CE Conformity vi FCC-B Radio Frequency Interference Statement vi WEEE Statement vii Chemical Substances Information vii RoHS Statement vii
Getting Started 1-1
Package Contents 1-2 Installing the Monitor Stand 1-3 Adjusting the Monitor 1-8 Monitor Overview 1-10 Connecting the Monitor to PC 1-16
OSD Setup 2-1
ii | Navi Key | 2-2 |
OSD Setup via Navi Key | 2-5 |
Appendix A-1
MAG 272C Series Specifications A-2 MAG 272C Series Preset Display Modes A-3 MAG 272 Series Specifications A-5 MAG 272 Series Preset Display Modes A-6 Troubleshooting A-8
Preface
Copyright and Trademarks Notice
Copyright © Micro-Star Int'l Co., Ltd. All rights reserved. The MSI logo used is a registered trademark of Micro-Star Int'l Co., Ltd. All other marks and names mentioned may be trademarks of their respective owners. No warranty as to accuracy or completeness is expressed or implied. MSI reserves the right to make changes to this document without prior notice.
Revision
Revision | Date |
V1.0 | 2019/10 |
Technical Support
If a problem arises with your product and no solution can be obtained from the user's manual, please contact your place of purchase or local distributor. Alternatively, please visit https://www.msi.com/support/ for further guidance.
iii
Safety Instructions
◙◙ Read the safety instructions carefully and thoroughly.
◙◙ All cautions and warnings on the device or user's manual should be noted.
◙◙ Refer servicing to qualified personnel only.
Keep the User's Guide that comes with the package for future reference.
To prevent fire or shock hazard, keep this device away from humidity and high temperature.
Lay this device on a reliable flat surface before setting it up.
iv
◙◙ Make sure that the power voltage is within its safety range and has been adjusted properly to the value of 100~240V before connecting the device to the power outlet. Do not disable the protective earth pin from the plug. The device must be connected to an earthed mains socket-outlet.
◙◙ Always disconnect the power cord or switch the wall socket off if the device would be left unused for a certain time to achieve zero energy consumption.
The ventilator on the device is used for air convection and to prevent the device from overheating. Do not cover the ventilator.
Do not leave the device in an unconditioned environment with a storage temperature above 60OC or below -20OC, which may damage the device.
NOTE: The maximum operating temperature is around 40OC.
When cleaning the device, be sure to remove the power plug. Use a piece of soft cloth rather than industrial chemical to clean the device. Never pour any liquid into the opening; that could damage the device or cause electric shock.
Preface
Msi P67a-gd65 B3 Manual
Place the power cord in a way that people are unlikely to step on it. Do not place anything on the power cord.
Always keep strong magnetic or electrical objects away from the device.
If any of the following situations arises, get the device checked by service personnel:
◙◙ The power cord or plug is damaged. ◙◙ Liquid has penetrated into the device.
◙◙ The device has been exposed to moisture.
◙◙ The device does not work well or you can not get it work according to user's manual.
◙◙ The device has dropped and damaged. ◙◙ The device has obvious sign of breakage.
Green Product Features
◙◙ Reduced energy consumption during use and stand-by
◙◙ Limited use of substances harmful to the environment and health
How to uninstall Epson drivers and software on a Mac. How do I use the Print Head Alignment utility in Mac OS X? Epson TM-T88IV Series. Epson TM-T88IV Series (Legacy Product) Additional support for this product, such as drivers and manuals, is available from our Business System Products Technical Support website. Note: To download software or manuals, a free user account may be required. https://anhekenqui1983.mystrikingly.com/blog/epson-tm-t88iv-driver-mac-os-x. Epson Tm T88iv Driver Mac Os X. Download Epson TM-T82II-i Driver Printer – Are you looking for Epson TM-T82II-I download driver? Here are the reasons why you should have this printer. Download latest Printer Driver for Macintosh / MAC OS. Download Epson TM-T82II-i Driver here; Download latest Printer Driver for Windows (2000, XP, Vista, 7, 8.
◙◙ Easily dismantled and recycled v ◙◙ Reduced use of natural resources by encouraging recycling
◙◙ Extended product lifetime through easy upgrades
◙◙ Reduced solid waste production through take-back policy Environmental Policy
◙◙ The product has been designed to enable proper reuse of parts and recycling and should not be thrown away at its end of life.
◙◙ Users should contact the local authorized point of collection for recycling and disposing of their end-of-life products.
◙◙ Visit the MSI website and locate a nearby distributor for further recycling information.
◙◙ Users may also reach us at gpcontdev@msi.com for information regarding proper disposal, take-back, recycling, and disassembly of MSI products.
Warning! Overuse of screens is likely to affect eyesight.
Recommendations:
1.Take a 10-minute break for every 30 minutes of screen time.
2.Children under 2 years of age should have no screen time. For children aged 2 years and over, screen time should be limited to less than one hour per day.
CE Conformity
This device complies with the requirements set out in the Council
Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (2014/30/EU), Low-voltage Directive (2014/35/EU), ErP Directive (2009/125/EC) and RoHS directive (2011/65/
EU). This product has been tested and found to comply with the harmonized standards for Information Technology Equipment published under Directives of Official Journal of the European Union.
FCC-B Radio Frequency
Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the measures listed below:
Reorient or relocate the receiving antenna.
viIncrease the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
https://anhekenqui1983.mystrikingly.com/blog/free-android-data-recovery-serial-key. System Requirements Operation SystemWindows 10, 8.1, 8, 7, VistaMac OS X 10.8 and aboveiOS: 10.0 and higherAndroid: Google Android 5.1 or higherProcessorIntel Pentium 4, higher, or equivalent processorStorage200 MB of free hard disk space for application filesRAM256 MB of memory (RAM), 512 MB recommendedWindows DrFone Filename:drfonesetupfull3360.exe Filesize:1 MBMac DrFone Filename:drfonesetupfull3360.dmg Filesize:1 MBAndroid DrFone Filename:drfoneandroid1.5.0.51.apk Filesize:37 MBiOS DrFone Filename:drfoneios1.5.1.ipa Filesize:27.4 MB.
Consult the dealer or an experienced radio/television technician for help.
Notice 1
The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Notice 2
Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1.this device may not cause harmful interference, and
2.this device must accept any interference received, including interference that may cause undesired operation.
MSI Computer Corp.
901 Canada Court, City of Industry, CA 91748, USA (626)913-0828
www.msi.com
Preface
WEEE Statement |
Under the European Union ('EU') Directive on Waste Electrical and |
Electronic Equipment, Directive 2012/19/EU, which takes effect on August |
13, 2005, products of 'electrical and electronic equipment' cannot be |
discarded as municipal waste anymore and manufacturers of covered |
electronic equipment will be obligated to take back such products at the end |
of their useful life. |
Chemical Substances Information |
In compliance with chemical substances regulations, such as the EU REACH Regulation |
(Regulation EC No. 1907/2006 of the European Parliament and the Council), MSI |
provides the information of chemical substances in products at: |
https://www.msi.com/html/popup/csr/evmtprtt_pcm.html |
RoHS Statement |
Japan JIS C 0950 Material Declaration |
A Japanese regulatory requirement, defined by specification JIS C 0950, mandates |
that manufacturers provide material declarations for certain categories of electronic |
products offered for sale after July 1, 2006. |
https://www.msi.com/html/popup/csr/cemm_jp.html |
vii |
https://tw.msi.com/html/popup/csr_tw/cemm_jp.html |
India RoHS |
This product complies with the 'India E-waste (Management and Handling) Rule 2016' |
and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls |
or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 |
weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule. |
Turkey EEE Regulation |
Conforms to the EEE Regulations of the Republic Of Turkey |
Ukraine Restriction of Hazardous Substances |
The equipment complies with requirements of the Technical Regulation, approved by |
the Resolution of Cabinet of Ministry of Ukraine as of December 3, 2008 № 1057, |
in terms of restrictions for the use of certain dangerous substances in electrical and |
electronic equipment. |
Vietnam RoHS |
As from December 1, 2012, all products manufactured by MSI comply with Circular
30/2011/TT-BCT temporarily regulating the permitted limits for a number of hazardous substances in electronic and electric products.
1
Getting Started
This chapter provides you with the information on hardware setup procedures. While connecting devices, be careful in holding the devices and use a grounded wrist strap to avoid static electricity.
IMPORTANT
•The illustrations are for reference only. Your monitor may vary in appearance.
•Do not use any sharp objects on the monitor.
Package Contents
1.Monitor
2.Stand
3.Stand Base with Screw
4.Power Cord (MAG272C / MAG272CR / MAG272CQR / MAG272CRX)
5.Power Adapter & Power Cord (MAG272 / MAG272R / MAG272QP / MAG272QR)
6.HDMI Cable (Optional)
7.DisplayPort Cable (Optional)
8.USB Upstream Cable (to enable the USB ports on the monitor)
9.Quick Start Guide
10.Warranty Card
*Contact your place of purchase or local distributor if any of the items is damaged or missing.
*Package contents may vary by country.
1-2
Getting Started
Installing the Monitor Stand
IMPORTANT
Place the monitor on a soft, protected surface to avoid scratching the display panel.
hh MAG272C
1.Align the latches of the stand to the monitor.
2.Tighten the stand with the stand screws.
3.Connect the base to the stand and tighten the base screw to secure the base.
1
1-3
2
3
4. Align the latches to place the VESA cover and lock the screws. 5.
4
6.
1-4 7.
IMPORTANT
The holes for installing the stand can be also used for wall mount. Please contact your dealer for proper wall mount kit.
Getting Started
hh MAG272CR/ MAG272CQR/ MAG272CRX
1.Align the latches of the stand to the monitor.
2.Tighten the stand with the stand screws.
3.Connect the base to the stand and tighten the base screw to secure the base.
1
2
1-5
3
IMPORTANT
The holes for installing the stand can be also used for wall mount. Please contact your dealer for proper wall mount kit.
hh MAG272
1.Align the latches of the stand to the monitor.
2.Tighten the stand with the stand screws.
3.Connect the base to the stand and tighten the base screw to secure the base.
1
2
1-6
3
IMPORTANT
The holes for installing the stand can be also used for wall mount. Please contact your dealer for proper wall mount kit.
Optix Series
LCD Monitor
Optix MAG272C (3CA5) | Optix MAG272 (3CA7) |
Optix MAG272CR (3CA5) | Optix MAG272R (3CA7) |
Optix MAG272CQR (3CA6) | Optix MAG272QP (3CA8) |
Optix MAG272CRX (3CA0) | Optix MAG272QR (3CA8) |
Contents
Copyright and Trademarks Notice iii Revision iii Technical Support iii Safety Instructions iv CE Conformity vi FCC-B Radio Frequency Interference Statement vi WEEE Statement vii Chemical Substances Information vii RoHS Statement vii
Getting Started 1-1
Package Contents 1-2 Installing the Monitor Stand 1-3 Adjusting the Monitor 1-8 Monitor Overview 1-10 Connecting the Monitor to PC 1-16
OSD Setup 2-1
ii | Navi Key | 2-2 |
OSD Setup via Navi Key | 2-5 |
Appendix A-1
MAG 272C Series Specifications A-2 MAG 272C Series Preset Display Modes A-3 MAG 272 Series Specifications A-5 MAG 272 Series Preset Display Modes A-6 Troubleshooting A-8
Preface
Copyright and Trademarks Notice
Copyright © Micro-Star Int'l Co., Ltd. All rights reserved. The MSI logo used is a registered trademark of Micro-Star Int'l Co., Ltd. All other marks and names mentioned may be trademarks of their respective owners. No warranty as to accuracy or completeness is expressed or implied. MSI reserves the right to make changes to this document without prior notice.
Revision
Revision | Date |
V1.0 | 2019/10 |
Technical Support
If a problem arises with your product and no solution can be obtained from the user's manual, please contact your place of purchase or local distributor. Alternatively, please visit https://www.msi.com/support/ for further guidance.
iii
Safety Instructions
◙◙ Read the safety instructions carefully and thoroughly.
◙◙ All cautions and warnings on the device or user's manual should be noted.
◙◙ Refer servicing to qualified personnel only.
Keep the User's Guide that comes with the package for future reference.
To prevent fire or shock hazard, keep this device away from humidity and high temperature.
Lay this device on a reliable flat surface before setting it up.
iv
◙◙ Make sure that the power voltage is within its safety range and has been adjusted properly to the value of 100~240V before connecting the device to the power outlet. Do not disable the protective earth pin from the plug. The device must be connected to an earthed mains socket-outlet.
◙◙ Always disconnect the power cord or switch the wall socket off if the device would be left unused for a certain time to achieve zero energy consumption.
The ventilator on the device is used for air convection and to prevent the device from overheating. Do not cover the ventilator.
Do not leave the device in an unconditioned environment with a storage temperature above 60OC or below -20OC, which may damage the device.
NOTE: The maximum operating temperature is around 40OC.
When cleaning the device, be sure to remove the power plug. Use a piece of soft cloth rather than industrial chemical to clean the device. Never pour any liquid into the opening; that could damage the device or cause electric shock.
Preface
Place the power cord in a way that people are unlikely to step on it. Do not place anything on the power cord.
Always keep strong magnetic or electrical objects away from the device.
If any of the following situations arises, get the device checked by service personnel:
◙◙ The power cord or plug is damaged. ◙◙ Liquid has penetrated into the device.
◙◙ The device has been exposed to moisture.
◙◙ The device does not work well or you can not get it work according to user's manual.
◙◙ The device has dropped and damaged. ◙◙ The device has obvious sign of breakage.
Green Product Features
◙◙ Reduced energy consumption during use and stand-by
◙◙ Limited use of substances harmful to the environment and health
◙◙ Easily dismantled and recycled v ◙◙ Reduced use of natural resources by encouraging recycling
◙◙ Extended product lifetime through easy upgrades
◙◙ Reduced solid waste production through take-back policy Environmental Policy
◙◙ The product has been designed to enable proper reuse of parts and recycling and should not be thrown away at its end of life.
◙◙ Users should contact the local authorized point of collection for recycling and disposing of their end-of-life products.
◙◙ Visit the MSI website and locate a nearby distributor for further recycling information.
◙◙ Users may also reach us at gpcontdev@msi.com for information regarding proper disposal, take-back, recycling, and disassembly of MSI products.
Warning! Overuse of screens is likely to affect eyesight.
Recommendations:
1.Take a 10-minute break for every 30 minutes of screen time.
2.Children under 2 years of age should have no screen time. For children aged 2 years and over, screen time should be limited to less than one hour per day.
CE Conformity
This device complies with the requirements set out in the Council
Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (2014/30/EU), Low-voltage Directive (2014/35/EU), ErP Directive (2009/125/EC) and RoHS directive (2011/65/
EU). This product has been tested and found to comply with the harmonized standards for Information Technology Equipment published under Directives of Official Journal of the European Union.
FCC-B Radio Frequency
Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the measures listed below:
Reorient or relocate the receiving antenna.
viIncrease the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/television technician for help.
Notice 1
The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Notice 2
Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1.this device may not cause harmful interference, and
2.this device must accept any interference received, including interference that may cause undesired operation.
MSI Computer Corp.
901 Canada Court, City of Industry, CA 91748, USA (626)913-0828
www.msi.com
Preface
WEEE Statement |
Under the European Union ('EU') Directive on Waste Electrical and |
Electronic Equipment, Directive 2012/19/EU, which takes effect on August |
13, 2005, products of 'electrical and electronic equipment' cannot be |
discarded as municipal waste anymore and manufacturers of covered |
electronic equipment will be obligated to take back such products at the end |
of their useful life. |
Chemical Substances Information |
In compliance with chemical substances regulations, such as the EU REACH Regulation |
(Regulation EC No. 1907/2006 of the European Parliament and the Council), MSI |
provides the information of chemical substances in products at: |
https://www.msi.com/html/popup/csr/evmtprtt_pcm.html |
RoHS Statement |
Japan JIS C 0950 Material Declaration |
A Japanese regulatory requirement, defined by specification JIS C 0950, mandates |
that manufacturers provide material declarations for certain categories of electronic |
products offered for sale after July 1, 2006. |
https://www.msi.com/html/popup/csr/cemm_jp.html |
vii |
https://tw.msi.com/html/popup/csr_tw/cemm_jp.html |
India RoHS |
This product complies with the 'India E-waste (Management and Handling) Rule 2016' |
and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls |
or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 |
weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule. |
Turkey EEE Regulation |
Conforms to the EEE Regulations of the Republic Of Turkey |
Ukraine Restriction of Hazardous Substances |
The equipment complies with requirements of the Technical Regulation, approved by |
the Resolution of Cabinet of Ministry of Ukraine as of December 3, 2008 № 1057, |
in terms of restrictions for the use of certain dangerous substances in electrical and |
electronic equipment. |
Vietnam RoHS |
As from December 1, 2012, all products manufactured by MSI comply with Circular
30/2011/TT-BCT temporarily regulating the permitted limits for a number of hazardous substances in electronic and electric products.
1
Getting Started
This chapter provides you with the information on hardware setup procedures. While connecting devices, be careful in holding the devices and use a grounded wrist strap to avoid static electricity.
IMPORTANT
•The illustrations are for reference only. Your monitor may vary in appearance.
•Do not use any sharp objects on the monitor.
Package Contents
1.Monitor
2.Stand
3.Stand Base with Screw
4.Power Cord (MAG272C / MAG272CR / MAG272CQR / MAG272CRX)
5.Power Adapter & Power Cord (MAG272 / MAG272R / MAG272QP / MAG272QR)
6.HDMI Cable (Optional)
7.DisplayPort Cable (Optional)
8.USB Upstream Cable (to enable the USB ports on the monitor)
9.Quick Start Guide
10.Warranty Card
*Contact your place of purchase or local distributor if any of the items is damaged or missing. https://anhekenqui1983.mystrikingly.com/blog/creative-webcam-software-download.
*Package contents may vary by country.
1-2
Getting Started
Installing the Monitor Stand
IMPORTANT
Place the monitor on a soft, protected surface to avoid scratching the display panel.
hh MAG272C
1.Align the latches of the stand to the monitor.
2.Tighten the stand with the stand screws.
3.Connect the base to the stand and tighten the base screw to secure the base.
Msi P67a-gd65 B3 User Manual Instructions
1
1-3
2
3
4. Align the latches to place the VESA cover and lock the screws. 5.
4
6.
1-4 7.
IMPORTANT
The holes for installing the stand can be also used for wall mount. Please contact your dealer for proper wall mount kit.
Getting Started
hh MAG272CR/ MAG272CQR/ MAG272CRX
1.Align the latches of the stand to the monitor.
2.Tighten the stand with the stand screws.
3.Connect the base to the stand and tighten the base screw to secure the base.
Msi P67a-gd65 B3 User Manual Download
1
2
1-5
3
IMPORTANT
The holes for installing the stand can be also used for wall mount. Please contact your dealer for proper wall mount kit.
hh MAG272
Msi P67a-gd65 B3 Drivers
1.Align the latches of the stand to the monitor.
2.Tighten the stand with the stand screws.
Msi P67a-gd65 B3 User Manual User
3.Connect the base to the stand and tighten the base screw to secure the base.
1
2
1-6
3
IMPORTANT
Msi P67a-gd65 B3 User Manual Pdf
The holes for installing the stand can be also used for wall mount. Please contact your dealer for proper wall mount kit.
